Multi-format CAD tools · View without an account
CADProps
Open CAD file

Privacy settings

Allow Google Analytics to measure visits and tool use so we can improve CADProps. You can change your choice anytime.
Home / Guides / Open CAD files / How to Save and Restore Inspection Views in a STEP Model · STEP tools & guides
Opening files

How to Save and Restore Inspection Views in a STEP Model

Save two angles of a STEP model in CADProps and switch between them while inspecting the same file. See where saved views are kept.

CADProps · Engineering guide · Reviewed by CADProps · Updated 2026-11-12 · Editorial policy
On this page
How to Save and Restore Inspection Views in a STEP Model — conceptual illustration
CADProps engineering guide · Conceptual illustration

The bore and the mounting feet on a bearing housing are easier to check from different angles. Open the file in the CADProps STEP viewer and use Display → Save current view to keep both angles available while you inspect the part. Select a saved view to restore its framing, zoom and display settings.

Save the overview and a second angle

  1. Open your STEP or STP file and wait for the model to load. To follow the example, use the public bearing housing sample.
  2. Use Fit to frame the model. Open Display, scroll to View and select Save current view. The first entry appears as View 1.
  3. Drag the model until you can see all four holes in the base. Use the scroll wheel to adjust the framing if needed. Select Save current view again to create View 2.
  4. Select View 1, then View 2, and check that each angle shows the surfaces you intended to inspect. If you saved the wrong angle, use the × beside that entry and save the corrected view.
CADProps bearing housing tilted to show four base holes with View 1 and View 2 listed in Display
The public bearing housing tilted toward its base. This angle shows all four mounting holes. The two saved views are listed in the Display panel.

Switch back without losing the inspection angle

Select View 1 to see how the front flange sits on the base. When you need to check the bolt pattern again, select View 2. If you only need to turn the model around a point near a small feature, use the rotation center control.

CADProps displaying the restored three-quarter overview of the bearing housing after View 1 is selected
Selecting View 1 restores the three-quarter angle. The bounding-box values in Properties stay the same as in View 2.

Find the views when you reopen the model

CADProps keeps up to 12 views for the same model record in the current browser. If the list is empty after reopening the file, check that you opened the same record in the same browser and that its review data is still available. Uploading the same filename again creates a separate record. If you want to send someone a specific angle, restore it and use Share → Export current view as an image. For a comment attached to a particular feature, use Annotations.

Related reading

Original article: CADProps · https://www.cadprops.com/guides/save-step-inspection-views/