# Aluminum parts: 6061, 7075 and 5052

Choose aluminum grades for machined prototypes, brackets and bent sheet-metal enclosures, and specify the finish before quoting.

Choose aluminum grades for machined prototypes, brackets and bent sheet-metal enclosures, and specify the finish before quoting.

## What to consider

6061 is a practical starting point for many machined housings and brackets. 7075 is considered where strength matters, but grade alone does not prove a design is adequate. 5052 is a different choice for formed sheet. Specify both the alloy and temper when required.

## Design and purchasing details

State which dimensions apply after anodizing, which holes must remain uncoated and which faces are cosmetic. Deep pockets, thin walls and multiple setups affect cost. Do not request a bending operation merely because a machining alloy is available.

## Illustrative example

A machined bracket with a bearing bore needs the bore fit and datum identified. An anodized outer face and an uncoated mating face should be marked separately on the drawing.

## Quote checklist

Keep the drawing revision and units consistent. Include quantity, material, critical dimensions, finish and delivery destination. If a requirement is undecided, explain the intended use.

The agreed quote defines the process, inspection documents, price and delivery schedule. Changes to material or process require your approval.

## Common question

### Does anodizing leave every dimension unchanged?

No. Account for the coating on fits and threaded features. Agree on masking and whether critical dimensions are measured before or after finishing.

HTML page: https://www.cadprops.com/manufacturing/materials/aluminum/
