# CNC turning for shafts and fittings

Prepare turned shafts, bushings and threaded fittings with diameter, runout and surface requirements.

Prepare turned shafts, bushings and threaded fittings with diameter, runout and surface requirements.

## What to consider

Turning rotates the workpiece against a tool and is suited to many axisymmetric features. Specify alloy or plastic grade, stock dimensions when constrained, and the faces or diameters that locate the part in its assembly.

Available materials, part size, feature limits and achievable tolerances require engineering review for the actual model.

## Design and purchasing details

Long slender shafts, deep bores and thin walls need support and careful setup. Cross holes, flats or eccentric features may require additional operations. Define thread form, usable depth, shoulder details and inspection datums.

## What affects the quote

Material grade, stock removed, tool access, setups and inspection effort affect the price. Quantity can spread setup cost, but a unit-price reduction must be confirmed in the quote.

## Illustrative example

For a stepped shaft, distinguish bearing seats from clearance diameters and identify the reference axis for runout. Do not impose the tightest fit on every diameter.

## Quote checklist

Keep the drawing revision and units consistent. Include quantity, material, critical dimensions, finish and delivery destination. If a requirement is undecided, explain the intended use.

The agreed quote defines the process, inspection documents, price and delivery schedule. Changes to material or process require your approval.

## Common question

### Can turning also produce flats and side holes?

They may need driven tooling or a separate setup. Include them in the model and drawing so the full operation sequence is quoted.

HTML page: https://www.cadprops.com/manufacturing/cnc-machining/turning/
