# FDM plastic 3D printing

Plan FDM fixtures, housings and functional mock-ups with layer direction, supports and service temperature in mind.

Plan FDM fixtures, housings and functional mock-ups with layer direction, supports and service temperature in mind.

## What to consider

FDM deposits heated filament along successive paths. PLA, ABS, ASA and other available formulations suit different conditions. Choose by application and confirm the actual material; filament names do not establish the same properties across suppliers.

Available materials, part size, feature limits and achievable tolerances require engineering review for the actual model.

## Design and purchasing details

Layer direction affects strength, and overhangs may need supports. Warping, thin walls and small holes can influence fit. Mark load paths and mounting surfaces, and distinguish a visible layer texture from an unacceptable cosmetic defect.

## What affects the quote

Material, print time, orientation, supports and finishing affect the price. Increasing wall thickness or infill changes both cost and performance; confirm the chosen setup.

## Illustrative example

For a workshop jig, indicate the clamping direction and contact surfaces. A small trial can check fit and loading before a larger print or batch.

## Quote checklist

Keep the drawing revision and units consistent. Include quantity, material, critical dimensions, finish and delivery destination. If a requirement is undecided, explain the intended use.

The agreed quote defines the process, inspection documents, price and delivery schedule. Changes to material or process require your approval.

## Common question

### Is a printed part equally strong in every direction?

Do not assume that. State the loading direction and discuss build orientation. Test the chosen material and geometry under the intended conditions.

HTML page: https://www.cadprops.com/manufacturing/3d-printing/fdm/
