# CAD Guides: STEP Measurement, Weight & File Formats — Page 4

Practical notes on CAD formats, model properties, units and engineering handoffs. — Page 4

- [STEP vs STP: Same Exchange Format, Different Extension](https://www.cadprops.com/guides/step-vs-stp-file-extension/index.md): STEP and STP are two common extensions for the same STEP exchange data, not different formats. Learn what renaming changes, what it does not, and which checks matter more.
- [What B-Rep Means in a STEP or IGES File](https://www.cadprops.com/guides/what-is-brep/index.md): Boundary representation is the face, edge and solid model behind precise CAD properties. A shaded triangle view is not the same thing.
- [CADProps File Storage Limits and Expiry](https://www.cadprops.com/guides/cadprops-storage-and-expiry/index.md): Understand guest versus signed-in file retention, what uses account storage, which actions extend expiry and what deletion does to share links.
- [How to Use CADProps: Open, Inspect and Save a CAD File](https://www.cadprops.com/guides/get-started-with-cadprops/index.md): An illustrated CADProps walkthrough: selection, seven measurement modes, CSV, sections, explode, annotations, PNG, comparison, conversion, storage and sharing.
- [Save and Organize CAD Files in Your CADProps Library](https://www.cadprops.com/guides/save-cad-files-online/index.md): Use My files to find recent uploads, group models in folders, mark favorites, reopen originals and manage batches across devices.
- [Share a CAD Model with a View-Only Link in CADProps](https://www.cadprops.com/guides/share-cad-model-link/index.md): Create a fixed 3D model link, keep the free 7-day link or upgrade to a Pro link with a longer expiry or password, and check the recipient's view before sending.
- [Blind Tapped Hole Depth: Separate Thread Depth from Drill Depth](https://www.cadprops.com/guides/blind-tapped-hole-depth/index.md): Design blind tapped holes by separating usable full-thread depth from drilled depth, tap lead, drill-point clearance and chip space before releasing a CNC drawing or STEP model.
- [CNC Hole Edge Distance: Leave Enough Material Around Drilled Features](https://www.cadprops.com/guides/cnc-hole-edge-distance/index.md): Review CNC holes near part edges by checking the remaining ligament, largest feature diameter, depth, tolerance and load path before releasing a machined part.
- [CNC Internal Corner Radius: Design Pockets for Real End Mills](https://www.cadprops.com/guides/cnc-internal-corner-radius/index.md): Understand why CNC-milled internal corners need radii, how cutter diameter and tool access affect the result, and how to review pocket corners before sending a STEP file for quote.
- [Minimum Wall Thickness for CNC Machining: No Single Safe Number](https://www.cadprops.com/guides/cnc-minimum-wall-thickness/index.md): Thin CNC walls lose stiffness and can vibrate, deflect or warp. Use published wall-thickness values as starting points, then check material, wall height, tool access, workholding and tolerance.
- [Deep Hole Drilling: Use Depth-to-Diameter Ratio Before You Quote](https://www.cadprops.com/guides/deep-hole-drilling-depth-to-diameter-ratio/index.md): Calculate drilling depth-to-diameter ratio, understand why tool reach, chip evacuation and coolant change with deeper holes, and review deep holes in CAD before CNC quoting.
- [Reamed Hole vs Drilled Hole: Use Precision Only Where the Fit Needs It](https://www.cadprops.com/guides/reamed-hole-vs-drilled-hole/index.md): Compare drilled and reamed holes for CNC parts, including diameter tolerance, surface finish, position, pre-hole quality and when a drawing should call for a precision fit.

HTML page: https://www.cadprops.com/guides/page/4/
