# How to Measure the Thickness Under a Pocket in a STEP File

Pick the pocket floor with Exact wall thickness in CADProps. Check the remaining material under the cut from a single accessible face.

Open the part in the [CADProps dimensions tool](https://www.cadprops.com/tools/cad-dimensions/index.md). Choose **Measure → Exact wall thickness** and click well inside the pocket floor. CADProps measures inward along the normal to the picked CAD face, stopping at the first exit of the same solid. You can check the material under the floor while viewing the part from above.

## Check the floor and rim separately

1. Open the [pocket plate sample](https://www.cadprops.com/assets/evidence/seo-2026-11-19/pocket-floor-thickness.step) and use millimetres. The plate is **12 mm** high with an **8 mm** deep pocket.
2. Click near the middle of the lower floor with **Exact wall thickness** active. The result is **4 mm**, from the pocket floor down to the underside.
3. Click the broad top rim, away from the pocket edge. It reads **12 mm** because that part of the solid extends from the top to the underside.

<figure class="workflow-evidence"><img src="/assets/evidence/seo-2026-11-19/pocket-floor-thickness-1440.webp" alt="Schematic section of a pocketed STEP plate showing 4 millimetres of material below the pocket floor and 12 millimetres through the rim" width="1440" height="680" loading="lazy"><figcaption>Schematic of the sample. Move the pick from the pocket floor to the rim to see a different thickness on the same solid.</figcaption></figure>

## When the pick has no clear exit

Move the pick away from the pocket edge, a corner or a blend. A boundary can make the first exit ambiguous. If **Exact wall thickness** is missing, check that you are in the workspace with a complete STEP solid and that the model has readable CAD faces. Open shells and display meshes cannot supply this exact solid measurement.

This is a local reading. Repeat it at other locations if the floor slopes or the underside varies. For a machining review, compare those readings with the tolerances in the drawing and the supplier's wall-thickness requirements.

## Related reading

- [Minimum Wall Thickness for CNC Machining: No Single Safe Number](https://www.cadprops.com/guides/cnc-minimum-wall-thickness/index.md)
- [Which CADProps CSV Contains Your Measurements?](https://www.cadprops.com/guides/export-cad-measurements-vs-properties-csv/index.md)
- [How to Measure Thickness Between Two STEP Faces](https://www.cadprops.com/guides/measure-parallel-face-distance-step/index.md)
- [How to Measure a Countersink Angle in a STEP File](https://www.cadprops.com/guides/measure-step-countersink-angle/index.md)
- [Measure STEP Files Online: Dimensions, Distances & Units](https://www.cadprops.com/guides/measure-step-file/index.md)

Original article: https://www.cadprops.com/guides/measure-step-pocket-floor-thickness/

HTML page: https://www.cadprops.com/guides/measure-step-pocket-floor-thickness/
