# How to Measure the Perimeter of a STEP Face With a Hole

Use Perimeter in CADProps to check the total boundary length of a STEP face. Separate the outside outline from the edge around a hole.

Open your STEP in the [CADProps dimensions tool](https://www.cadprops.com/tools/cad-dimensions/index.md), choose **Measure → Perimeter**, and click inside the face. The result adds the CAD edges on its boundary, including any holes in that face. That total is useful when you need the length of every cut edge on a plate.

## Check the outside outline and the hole

1. Open the [perimeter sample](https://www.cadprops.com/assets/evidence/seo-2026-11-21/plate-perimeter.step). The top face is a **60 × 30 mm** rectangle with a **10 mm** hole.
2. Select the broad top face away from the hole and outside edges. **Perimeter** should read about **211.42 mm**. The outside rectangle contributes **180 mm** and the hole adds about **31.42 mm**.
3. To check just the hole boundary, use **Edge** and click its circular rim. To check only the outside loop, measure and sum the four straight outside edges.

<figure class="workflow-evidence"><img src="/assets/evidence/seo-2026-11-21/step-face-perimeter-1440.webp" alt="Schematic of a rectangular STEP face showing its 180 millimetre outside outline, 31.42 millimetre hole boundary and 211.42 millimetre total perimeter" width="1440" height="680" loading="lazy"><figcaption>Schematic of the sample top face. Both the outside boundary and the circular cutout contribute to the face perimeter.</figcaption></figure>

If the result is unexpectedly low, check the face highlight. A pick on a side wall or on the cylindrical hole wall selects a different face with its own boundaries. If **Perimeter** is unavailable, check whether the file opened as a mesh. For an exact face perimeter, request a STEP export with readable CAD faces.

## Related reading

- [Which CADProps CSV Contains Your Measurements?](https://www.cadprops.com/guides/export-cad-measurements-vs-properties-csv/index.md)
- [How to Measure One Curved Face in a STEP File](https://www.cadprops.com/guides/measure-curved-face-area-step/index.md)
- [How to Measure the Gap Between Coplanar STEP Faces](https://www.cadprops.com/guides/measure-gap-between-coplanar-step-faces/index.md)
- [How to Measure Thickness Between Two STEP Faces](https://www.cadprops.com/guides/measure-parallel-face-distance-step/index.md)
- [Measure STEP Files Online: Dimensions, Distances & Units](https://www.cadprops.com/guides/measure-step-file/index.md)
- [How to Measure Hole Center Distance in a STEP File](https://www.cadprops.com/guides/measure-step-hole-center-distance/index.md)

Original article: https://www.cadprops.com/guides/measure-step-face-perimeter-with-hole/

HTML page: https://www.cadprops.com/guides/measure-step-face-perimeter-with-hole/
