# How to Measure Thickness Between Two STEP Faces

Measure between parallel planar faces in CADProps and fix a rejected selection when you pick a side wall or curved surface.

To check the thickness of a plate, open the STEP in the [CADProps STEP viewer](https://www.cadprops.com/tools/step-viewer/index.md) and choose **Measure → Distance → Face distance**. Pick the two flat faces that define the thickness. CADProps measures the perpendicular separation of their planes, so the points you click can be at different places on the two faces.

## Check the top and bottom of a known block

1. Open the public [block.step](https://www.cadprops.com/samples/block.step) and use millimetres. Its X, Y and Z extents are 40, 30 and 20 mm.
2. In **Face distance**, select the broad top face. Rotate the model to expose the underside, then select the broad bottom face.
3. The two faces lie at Z = 20 mm and Z = 0. Their separation is **20 mm**. If you happen to pick two points at opposite corners, the point-to-point distance would be longer. Face distance gives the same thickness anywhere on the two planes.

<figure class="workflow-evidence"><img src="/assets/evidence/seo-2026-11-15/step-face-distance-1440.webp" alt="Side-view schematic of a STEP block showing 20 millimetres between its parallel top and bottom faces" width="1440" height="720" loading="lazy"><figcaption>Schematic of the public STEP block. The two highlighted faces define thickness along Z.</figcaption></figure>

## Fix a rejected second face

If you click a side wall after the top face, the planes intersect. The viewer prompts you to select parallel planar faces. Rotate the part and choose the underside. Use **Angle** when the angle between the faces is the quantity you need.

If the surface is a fillet or cylinder, look for the flat face next to it. If **Face distance** is absent, check whether the viewer loaded a mesh preview. Use a STEP export with readable planar CAD faces for this operation.

For an offset pair of faces, the measured separation is between their extended planes. If you need the closest gap between finite edges or corners, identify those features and use a measurement suited to them.

## Related reading

- [Which CADProps CSV Contains Your Measurements?](https://www.cadprops.com/guides/export-cad-measurements-vs-properties-csv/index.md)
- [How to Measure One Curved Face in a STEP File](https://www.cadprops.com/guides/measure-curved-face-area-step/index.md)
- [Measure STEP Files Online: Dimensions, Distances & Units](https://www.cadprops.com/guides/measure-step-file/index.md)
- [How to Measure Hole Center Distance in a STEP File](https://www.cadprops.com/guides/measure-step-hole-center-distance/index.md)
- [How to Read X, Y and Z Coordinates in a STEP File](https://www.cadprops.com/guides/read-point-coordinates-step/index.md)
- [STEP File (.step, .stp): What It Is and How to Open It](https://www.cadprops.com/guides/step-file-what-it-is-how-to-open/index.md)

Original article: https://www.cadprops.com/guides/measure-parallel-face-distance-step/

HTML page: https://www.cadprops.com/guides/measure-parallel-face-distance-step/
