# How to Measure One Curved Face in a STEP File

Use Surface area in the CADProps STEP viewer to measure a single curved B-Rep face and check which surface the result covers.

If you need the area of a cylindrical wall, open the file in the [CADProps STEP viewer](https://www.cadprops.com/tools/step-viewer/index.md), choose **Measure → Surface area** and click the wall. Check the highlighted face to see what the result covers. The **Surface area** in **Properties** describes the whole model when its scope is **Whole model**.

## Try the wall and the end of the same cylinder

1. Open the public [cylinder.step](https://www.cadprops.com/samples/cylinder.step). It has a radius of **10 mm** and a height of **30 mm**.
2. Rotate until you can see both the curved wall and one circular end. In **Measure**, choose **Surface area** and use mm² as the area unit.
3. Click well inside the curved wall, away from the rim where it meets the end. The measured face should cover the wall. For this sample, its area rounds to **1,884.96 mm²**.
4. Click the flat circular end. That face measures about **314.16 mm²**. If you see that smaller number when you meant to pick the wall, rotate the model and select the wall again.

<figure class="workflow-evidence"><img src="/assets/evidence/seo-2026-11-14/cylinder-face-area-1440.webp" alt="Schematic of the public STEP cylinder with the curved wall shaded and the wall, end and whole-model areas labeled" width="1440" height="720" loading="lazy"><figcaption>Schematic of the public STEP cylinder. Choose the curved wall for its area. The complete solid also includes the two circular ends.</figcaption></figure>

The wall wraps around the full cylinder, so its area is circumference times height, or 2π × 10 × 30 mm². The [whole-model area](https://www.cadprops.com/guides/surface-area-from-cad-file/index.md) is about **2,513.27 mm²** because it also includes the two ends. Display rounding can differ from these examples.

## If the surface highlights in sections

A curved wall can consist of several CAD faces, even when it looks continuous. If the highlight stops along the wall, check whether the next region is a separate face. Measure each intended face once and add the values in the same area unit. Record which faces you included when you give the result to someone else.

If **Surface area** is unavailable in **Measure**, check whether the preview has B-Rep geometry. For a mesh-only result or a missing face, ask for a STEP export with readable CAD faces, then recheck the intended surface.

## Related reading

- [Which CADProps CSV Contains Your Measurements?](https://www.cadprops.com/guides/export-cad-measurements-vs-properties-csv/index.md)
- [How to Measure Thickness Between Two STEP Faces](https://www.cadprops.com/guides/measure-parallel-face-distance-step/index.md)
- [Measure STEP Files Online: Dimensions, Distances & Units](https://www.cadprops.com/guides/measure-step-file/index.md)
- [STEP File (.step, .stp): What It Is and How to Open It](https://www.cadprops.com/guides/step-file-what-it-is-how-to-open/index.md)
- [Open STEP Surface: Area Available, Volume Unavailable](https://www.cadprops.com/guides/step-open-surface-volume-case/index.md)
- [Calculate Surface Area from a STEP File](https://www.cadprops.com/guides/surface-area-from-cad-file/index.md)

Original article: https://www.cadprops.com/guides/measure-curved-face-area-step/

HTML page: https://www.cadprops.com/guides/measure-curved-face-area-step/
