# How to Inspect the First Layer of a G-code Print Use CADProps to step through a slicer file, isolate the first printed layer and tell travel moves from deposited lines. Open a plain-text print file in the [CADProps G-code viewer](https://www.cadprops.com/tools/gcode-viewer/index.md) if you want to check what the slicer wrote before sending it to the printer. The first movements can include travel or a purge line. To inspect the part footprint, stop on the first layer that deposits the part and separate extrusion from travel. ## View just the layer you want 1. Open the file and choose **Top**. Pause playback, then move the progress bar near the beginning. 2. Use the arrow buttons beside the progress bar to step to the first printed layer. Turn on **This layer only**. Scrub to the end of the layer so the full outline is visible. 3. Open **Line types**. Check the outline and any skirt or brim. Turn **Travel** on to see the moves between printed islands, then turn it off again to inspect the extrusion on its own. 4. Advance one layer. If the file has supports or multiple parts, check where the next layer begins and whether those islands are expected.
CADProps displays outer walls, infill and skirt in different colours in the pangolin print sample
The FABtotum pangolin sample paused farther into the print. Its feature colours illustrate what Line types can separate when the slicer writes the corresponding comments.
## When the picture does not match the slicer A line outside the main footprint may be a skirt, a brim or a travel move. Use the visible categories and the file order to distinguish them. Some slicers omit feature comments. If CADProps shows all extrusion in one colour, check the type in your slicer rather than assigning a meaning based on colour alone. Prints sliced one object at a time follow program order, so the layer numbers need not represent a single build-wide height sequence. If the footprint still looks wrong, use the [reference model overlay](https://www.cadprops.com/guides/compare-gcode-toolpath-to-cad-model/index.md) to check the source and its scale. These are programmed nozzle paths. The preview cannot tell you whether the filament will adhere to your bed or whether your printer's live Z offset is correct. The screenshot uses [FABtotum’s pangolin sample](https://github.com/FABtotum/gcode-samples) under [CC0 1.0](https://www.cadprops.com/assets/evidence/gcode-2026-10-24/fabtotum--gcode-samples--LICENSE.txt). ## Related reading - [How to Inspect CNC G-code Rapids and Z Steps](https://www.cadprops.com/guides/check-cnc-gcode-rapid-moves/index.md) - [How to Compare a G-code Toolpath with Its CAD Model](https://www.cadprops.com/guides/compare-gcode-toolpath-to-cad-model/index.md) - [G-code Files: What They Are and How to Open Them Online](https://www.cadprops.com/guides/open-gcode-file-online/index.md) Original article: https://www.cadprops.com/guides/gcode-first-layer-preview/ HTML page: https://www.cadprops.com/guides/gcode-first-layer-preview/