# How to Find the Center of Mass of a STEP Model

Turn on the center-of-mass marker in CADProps, check its X, Y and Z coordinates on a sample STEP block, and understand the uniform-density estimate.

If a model looks heavier on one side, its bounding box alone cannot tell you where the material balances. Open the file in the [CADProps STEP viewer](https://www.cadprops.com/tools/step-viewer/index.md) and turn on **Display → Center of mass**. When the viewer can calculate a point, the panel lists its X, Y and Z coordinates in the selected display units and places a marker on the model.

## Check the marker on a known STEP block

1. Download the public [block.step](https://www.cadprops.com/samples/block.step) and open it in the viewer.
2. In **Properties**, choose millimetres and confirm the bounding box is **40 × 30 × 20 mm**.
3. Open **Display**, find **Center of mass** and turn it on. Read the coordinates below the switch. For this sample, expect **X 20, Y 15, Z 10 mm**. The block starts at the origin, so the center is halfway along each side.
4. Rotate the model to see the point from another angle. Use the displayed coordinates when you need to record the location.

<figure class="workflow-evidence"><img src="/assets/evidence/seo-2026-11-13/step-block-center-1440.webp" alt="Schematic showing X 20 and Y 15 at the center of a 40 by 30 millimetre rectangle, with Z 10 halfway up the block" width="1440" height="720" loading="lazy"><figcaption>Schematic of the public STEP block. The dot is halfway along each axis because the block is solid and uniform.</figcaption></figure>

## Read the result for your own model

The viewer estimates the center from the display mesh using uniform density. On a bracket with an off-center cutout, the marker can shift toward the side with more material. The center of its [bounding box](https://www.cadprops.com/guides/step-file-bounding-box/index.md) still sits halfway between the outermost coordinates. **Set rotation center** is a separate camera control and can be moved to a convenient inspection point.

For an assembly with parts made of different materials, verify the balance in the authoring CAD system using the actual densities and a complete model. The marker in CADProps is a quick geometry check. It does not provide a verified lifting or fixturing point.

## If the marker is unavailable

If the panel says the display mesh encloses no volume, check whether the file contains open surfaces or incomplete geometry. Try the public block in the same workspace to confirm what the control looks like when it has a result. For your own part, ask for a STEP export with closed solids when a usable balance estimate is needed.

## Related reading

- [How to Make an Exploded STEP Assembly View for Review](https://www.cadprops.com/guides/explode-step-assembly-for-review/index.md)
- [How to Isolate a Part in a STEP Assembly in CADProps](https://www.cadprops.com/guides/isolate-part-in-step-assembly/index.md)
- [How to Make One Part Transparent in a STEP Assembly](https://www.cadprops.com/guides/make-step-assembly-part-transparent/index.md)
- [Open a Creo File Without Creo](https://www.cadprops.com/guides/open-creo-without-creo/index.md)
- [Open DWG or DXF Files Without AutoCAD](https://www.cadprops.com/guides/open-dwg-dxf-without-autocad/index.md)
- [F3D Files: How to Open a Fusion 360 Design Online Without Fusion](https://www.cadprops.com/guides/open-f3d-file-online/index.md)
- [IFC Files: How to Open a BIM Model Online and What You Will See](https://www.cadprops.com/guides/open-ifc-file-online/index.md)
- [JT File (.jt): What It Is and How to Open It Online](https://www.cadprops.com/guides/open-jt-file-online/index.md)
- [NEU Files: How to Open a Creo / Pro/ENGINEER Neutral File Online](https://www.cadprops.com/guides/open-neu-file-online/index.md)
- [PRC Files: What They Are and How to Open Them Online](https://www.cadprops.com/guides/open-prc-file-online/index.md)
- [U3D Files: What They Are and How to Open Them Online](https://www.cadprops.com/guides/open-u3d-file-online/index.md)
- [UNV Files: What They Are and How to Open Them Online](https://www.cadprops.com/guides/open-unv-file-online/index.md)
- [VDA-FS Files: What They Are and How to Open Them Online](https://www.cadprops.com/guides/open-vda-file-online/index.md)
- [X3D and X3DV Files: What They Are and How to Open Them Online](https://www.cadprops.com/guides/open-x3d-file-online/index.md)
- [How to Save and Restore Inspection Views in a STEP Model](https://www.cadprops.com/guides/save-step-inspection-views/index.md)
- [How to Rotate a STEP Model Around a Small Feature](https://www.cadprops.com/guides/set-step-model-rotation-center/index.md)
- [STEP File Bounding Box: Get Overall Dimensions Online](https://www.cadprops.com/guides/step-file-bounding-box/index.md)
- [STEP File (.step, .stp): What It Is and How to Open It](https://www.cadprops.com/guides/step-file-what-it-is-how-to-open/index.md)
- [How to Inspect an Internal Passage in a STEP Section View](https://www.cadprops.com/guides/step-section-view-internal-passage/index.md)
- [How to Use a Section Box in a STEP Model](https://www.cadprops.com/guides/use-step-section-box/index.md)
- [Pack a CAD Assembly ZIP: Choose the Root and Keep Paths](https://www.cadprops.com/guides/zip-packaged-cad-models/index.md)

Original article: https://www.cadprops.com/guides/find-center-of-mass-step/

HTML page: https://www.cadprops.com/guides/find-center-of-mass-step/
